TATTU 30A BLHELI_S ESC

Motors, ESC's & any Electronics not covered by other forums in here.

Moderators: Richard, 1275mini

TATTU 30A BLHELI_S ESC

Postby DivenParker » Thu Jun 15, 2017 9:42 am

Tattu has just released their new 30A ESC for the BLHeli_S firmware. Maybe a bit late to the game, as BLHeli_32 has already came out a few months ago.

Tattu is well known for their FPV Drone Racing LiPo batteries, and they are now expanding into the ESC market but Spedix for now seem to be the most popular choice with FPV racing http://www.quadcopters.co.uk/racing-drone-escs/spedix-gs-30a-blheli-32-bit-dshot-1200-esc


So here is an overview of the ESC’s, I will put them on a quad and test them on a later date and let you guys know how they perform :)

The Tattu 30A ESC’s come as a set of 4 in a really nice box. Probably the best packaging I have seen in ESC’s. They are sold at US$68 a set. They are also sold individually at $17 each.
Image
Spec

Current: 30A (40A burst)
Support LiPo: 2S – 5S
Weight: 6.5g (3.5g without wires)
Size: 26 x 14.5 x 6mm
Firmware: A_H_20
ESC Protocols: DShot600, 300, 150, Multishot, Oneshot
Power wire: 18AWG, 10cm (silicone wire)
Signal wire: 15cm with servo connector (silicone wire)
Size of the Tattu 30A ESC is between the Sunnysky R30 and DYS XSD 30A.
Image
Image
There is a heatsink on top of the FET’s.
Image
[youtube]https://www.youtube.com/watch?v=eZzVJb2JPsU&feature=youtu.be[/youtube]
DivenParker
 
Posts: 8
Joined: Sat Jan 07, 2017 9:52 am

Return to Motors, ESC's & Electronics

Who is online

Users browsing this forum: No registered users and 1 guest

cron