TATTU 30A BLHELI_S ESC

Motors, ESC's & any Electronics not covered by other forums in here.

Moderators: 1275mini, Richard

TATTU 30A BLHELI_S ESC

Postby DivenParker » Thu Jun 15, 2017 9:42 am

Tattu has just released their new 30A ESC for the BLHeli_S firmware. Maybe a bit late to the game, as BLHeli_32 has already came out a few months ago.

Tattu is well known for their Mini Quad LiPo batteries, and they are now expanding into the ESC market with their 30A BLHeli_S ESC.


So here is an overview of the ESC’s, I will put them on a quad and test them on a later date and let you guys know how they perform :)

The Tattu 30A ESC’s come as a set of 4 in a really nice box. Probably the best packaging I have seen in ESC’s. They are sold at US$68 a set. They are also sold individually at $17 each.
Image
Spec

Current: 30A (40A burst)
Support LiPo: 2S – 5S
Weight: 6.5g (3.5g without wires)
Size: 26 x 14.5 x 6mm
Firmware: A_H_20
ESC Protocols: DShot600, 300, 150, Multishot, Oneshot
Power wire: 18AWG, 10cm (silicone wire)
Signal wire: 15cm with servo connector (silicone wire)
Size of the Tattu 30A ESC is between the Sunnysky R30 and DYS XSD 30A.
Image
Image
There is a heatsink on top of the FET’s.
Image
[youtube]https://www.youtube.com/watch?v=eZzVJb2JPsU&feature=youtu.be[/youtube]
DivenParker
 
Posts: 6
Joined: Sat Jan 07, 2017 9:52 am

Return to Motors, ESC's & Electronics

Who is online

Users browsing this forum: No registered users and 1 guest

cron