Motors erratic and slow

Phantom 2 Chat, Queries and Advice

Moderators: 1275mini, Richard

Motors erratic and slow

Postby melhadfield » Sun Dec 13, 2015 4:51 pm

Hi Guys
Hoping someone can shed some light here. I removed the Fat Shark goggles transmitter from the Phantom 2 and after reassembly, the motors will not run properly.
When I command them to start, they run very slowly and in a stuttering way, the speed will not increase when commanded.
I didn't fit the Fat Shark originally so I am wondering is there a cable that goes into the Fat Shark transmitter connection that should be replaced?
The fault is on all 4 rotors so presume it's electronics rather than mechanical.
Any help much appreciated.
melhadfield
 
Posts: 1
Joined: Thu Dec 03, 2015 7:09 pm

Re: Motors erratic and slow

Postby lalacurf121 » Wed Jun 29, 2016 9:39 am

Very nice, it makes me understand more.
คาสิโนออนไลน์
lalacurf121
 
Posts: 16
Joined: Thu Jun 18, 2015 5:04 am

Re: Motors erratic and slow

Postby G6EJD » Wed Jun 29, 2016 10:05 pm

Remove the tx and see if that clears the fault
User avatar
G6EJD
 
Posts: 3541
Joined: Thu Mar 28, 2013 11:29 am
Location: Bath, UK


Return to Phantom 2

Who is online

Users browsing this forum: No registered users and 1 guest