zenmuse 5D trigger issue

help and info for the Z15- GH3 / 5D / NEX

Moderators: 1275mini, Richard

zenmuse 5D trigger issue

Postby renaudbarbier » Sun Mar 30, 2014 11:15 am

hello,

have installed a zenmuse 5D on one of our copters and from time to time (actualy with pitch full down) the IR signal is triggered randomly which basically cuts the video and / or shoot a stills.

could not find damaged wire or any issue. the gimbal looks clean.

any idea on what to look for?
renaudbarbier
 
Posts: 26
Joined: Mon Mar 17, 2014 7:27 am

Re: zenmuse 5D trigger issue

Postby renaudbarbier » Sun Apr 13, 2014 7:50 pm

ok seems like Z15 5D is shit... we bought a second one and same issue... random IR trigger.

and on top of this sometimes it vibrates.


no issue on our GH3 one... so might be specific to 5D... 2 new gimbals, 2 issues can't be bad luck!
renaudbarbier
 
Posts: 26
Joined: Mon Mar 17, 2014 7:27 am

Re: zenmuse 5D trigger issue

Postby renaudbarbier » Fri Apr 18, 2014 9:17 pm

see the link...

renaudbarbier
 
Posts: 26
Joined: Mon Mar 17, 2014 7:27 am

Re: zenmuse 5D trigger issue

Postby Pheliciano » Fri May 16, 2014 3:01 am

I have just noticed the same periodic shutter trigger on my Z15N gimbal.

I'm using an A2 flight controller with Spektrum DX8 and AR8000 receiver with DSMX satellite to gontrol the camera and gimbal.
Pheliciano
 
Posts: 3
Joined: Tue May 13, 2014 2:38 am

Re: zenmuse 5D trigger issue

Postby aerialcaptures » Thu May 22, 2014 11:43 am

Has anyone resolved this issue? We have been scratching our heads over this. Am planning to call DJI as well.
aerialcaptures
 
Posts: 4
Joined: Wed Oct 09, 2013 10:42 am

Re: zenmuse 5D trigger issue

Postby renaudbarbier » Fri May 23, 2014 3:14 am

aerialcaptures wrote:Has anyone resolved this issue? We have been scratching our heads over this. Am planning to call DJI as well.


From our side it is solved but we did not do anything for it
renaudbarbier
 
Posts: 26
Joined: Mon Mar 17, 2014 7:27 am

Re: zenmuse 5D trigger issue

Postby aerialcaptures » Fri May 23, 2014 10:01 am

Come to find out there looks to be a protocol issue/conflict between our futaba transmitter and the gimbals IR. Swaping out the transmitter next week will hopefully fix the issue.
aerialcaptures
 
Posts: 4
Joined: Wed Oct 09, 2013 10:42 am

Re: zenmuse 5D trigger issue

Postby lalacurf121 » Tue Mar 29, 2016 2:36 am

Thanks for the info
คาสิโน1688
lalacurf121
 
Posts: 16
Joined: Thu Jun 18, 2015 5:04 am


Return to Z15 Expert Gimbals

Who is online

Users browsing this forum: No registered users and 1 guest